Announcement

Collapse
No announcement yet.

Defcon 18 badge-related tweets and rumors

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Defcon 18 badge-related tweets and rumors

    Recent tweets about Defcon 18 badge from JoeGrand and others on twitter:

    [Oldest to newest]

    Originally posted by joeGrand
    The #DEFCON 18 Badge prototypes have arrived! http://imgur.com/NzTOI.jpg
    Originally posted by joeGrand
    After 6 hours of debugging hell thanks to poor quality PCB assembly, the #DEFCON 18 Badge final hardware has been approved!
    Originally posted by joeGrand
    We'll start production PCB fab on Monday! Still need to wrap up firmware design and I have about a month to do so. #DEFCON
    Originally posted by joeGrand
    #DEFCON 18 Badge firmware update: Low-level routines and basic state machine done, some hidden features added. So far, so good.
    Originally posted by ThisIsHNN
    Just got word from @joegrand that the HNN secret code has been embedded into the @defcon badge, good luck decyphering it! Mwahahaha
    Originally posted by joegrand
    @ThisIsHNN Uhrrr, so much for keeping that a secret!
    Originally posted by joeGrand
    Ordering additional components for the #DEFCON 18 badge. DT made a last minute decision to make 1000+ more!
    Originally posted by joeGrand
    Just bought the last known quantity of Freescale MC56F8006VLC available in the US. Now I have microcontrollers for the extra #DEFCON badges.
    Originally posted by joeGrand
    Shocked @ production pricing for #DEFCON 18 badge fab & assembly. 4x higher than initial estimate. e-Teknet fail. Looking at other options.
    Originally posted by daftdoki
    @joegrand >|< 10k this year?
    Originally posted by joeGrand
    @daftdoki 7,780 if all goes well.
    Originally posted by zrevai
    @joegrand #DEFCON 18, Bummer :( So hopefully you can find a way to get them assembled A.S.A.P. Sounds like an amazing badge.
    Originally posted by joeGrand
    @zrevai We're doing some complicated fabrication, but the latest pricing has caught us off guard and way out of our budget. #DEFCON 18
    [Added:]
    Originally posted by joeGrand
    No matter how carefully you plan or how early you start, something will always go wrong. Let the drama begin! #DEFCON 18 Badge
    Last edited by TheCotMan; May 7, 2010, 16:21.
    Tags: None
  • #2
    Re: Defcon 18 badge-related tweets and rumors

    Is there any update on what the paper badges will look like? I'm really looking forward to a hologram or color shifting text or something. Those badges are fun.

    Comment

    • #3
      Re: Defcon 18 badge-related tweets and rumors

      No matter how carefully you plan or how early you start, something will always go wrong. Let the drama begin! #DEFCON 18 Badge
      When did it actually 'begin'? I was under the impression that the goal was to have badges done by xmas. I'm under further impression that the process didn't begin until a month or so ago...

      Comment

      • #4
        Re: Defcon 18 badge-related tweets and rumors

        Originally posted by flea View Post
        When did it actually 'begin'? I was under the impression that the goal was to have badges done by xmas. I'm under further impression that the process didn't begin until a month or so ago...
        flea, you are under the wrong impression.
        PGP key: dtangent@defcon.org valid 2020 Jan 15, to 2024 Jan 01 Fingerprint: BC5B CD9A C609 1B6B CD81 9636 D7C6 E96C FE66 156A

        Comment

        • #5
          Re: Defcon 18 badge-related tweets and rumors

          Originally posted by Dark Tangent View Post
          flea, you are under the wrong impression.
          I don't doubt it, that's why I said it's was my impression :) which part was I wrong about?

          Comment

          • #6
            Re: Defcon 18 badge-related tweets and rumors

            I've just gone back to pull out tweets from Joe Grand that reference "badge" for Defcon 18 since Defcon 17 and include dates. This is only *public* discussion about the badge -- the same information anyone can get from twitter.

            This is also useful as a summary of information in tweets from Joe Grand for people wanting to prepare an environment for coding, or interested in hardware being used.

            Originally posted by JoeGrand
            (9:29 PM Aug 14th, 2009) Now it's time to start preparing for #DEFCON 18. Badges by Christmas? Something like that! :)
            Originally posted by JoeGrand
            (3:32 PM Feb 6th) RT @14311: Had a planning chat with @joegrand last night. #defcon 18 badges are gonna be sick!! <- Indeed. Maybe the best ones yet!
            Originally posted by JoeGrand
            (5:11 PM Feb 17th) Finalizing the #DEFCON 18 badge production schematic and BOM. No, the badges aren't done yet. Not even close! :P
            Originally posted by JoeGrand
            (12:37 PM Feb 18th) Working on final PCB layout for the #DEFCON 18 badge. For those keeping score, the prototype circuitry worked after minor tweaks.
            Originally posted by JoeGrand
            (2:51 PM Feb 18th) Just ordered the batteries for the #DEFCON 18 badges. Yup, we're using the CR2032 again!
            Originally posted by joeGrand
            ( 6:11 PM Feb 18th) I had no idea how complicated it is to select a suitable pressure-sensitive adhesive tape. #DEFCON 18 badge.
            Originally posted by openfly
            (6:47 PM Feb 18th) @joegrand I hope you added lots of breakout pin holes.
            Originally posted by JoeGrand
            (7:30 PM Feb 18th) @openfly I can neither confirm nor deny the existence or non-existence of breakout/prototyping holes on the #DEFCON 18 badge.
            Originally posted by JoeGrand
            (11:57 AM Feb 19th) Ordering production quantities of the discrete components for #DEFCON 18 badge.
            Originally posted by framerate
            (11:59 AM Feb 19th) @joegrand Go go customs! 2010 is the year for you to NOT fuck up the delivery! ;)
            Originally posted by JoeGrand
            (7:00 PM Feb 19th) @framerate We've got some plans to avoid Customs problems. Just hope they work :P
            Originally posted by JoeGrand
            (7:03 PM Feb 19th) Yup, Freescale MC56F8006VLC. Get your development environment set up early!
            Originally posted by openfly
            (7:07 PM Feb 19th) @joegrand you don't by any chance have a line on their reference tablets do you?
            Originally posted by joeGrand
            (3:00 PM Feb 20th) For #DEFCON 18 badge development, you will need CodeWarrior for 56800/E Digital Signal Controllers. Free at: http://tinyurl.com/yzcoplg
            Originally posted by joegrand
            (3:03 PM Feb 20th) MC56F8006VLC technical overview and documentation at http://tinyurl.com/yjtkczz Check the #DEFCON forums for badge hacking inf0z later...
            Originally posted by JoeGrand
            (3:00 PM Feb 20th) For #DEFCON 18 badge development, you will need CodeWarrior for 56800/E Digital Signal Controllers. Free at: http://tinyurl.com/yzcoplg
            Originally posted by framerate
            (11:36 PM Feb 21st) @joegrand Well mark my words, I'll buy you a beer (or whatever you like) if the badges are all there for registration :) DT too if he wants
            Originally posted by JoeGrand
            (7:27 AM Feb 22nd) @framerate Oh, they will be. I'll take a root beer!
            Originally posted by snowchyld
            (10:27 AM Feb 22nd) @joegrand did you use any of the ideas we sent ;)
            Originally posted by JoeGrand
            (7:46 PM Feb 22nd) @snowchyld Maybe, maybe not! ;)
            Originally posted by JoeGrand
            (9:58 AM Feb 23rd) The pièce de résistance of the #DEFCON 18 badge has been ordered. Wait until you see this thing. So cool.
            Originally posted by DougonIPComm
            (6:21 PM Feb 23rd) @_defcon_ @joegrand Does the #DEFCON 18 badge have frickin' lasers?
            Originally posted by JoeGrand
            (11:41 PM Feb 23rd) @DougonIPComm I can neither confirm nor deny the existence or non-existence of frickin' lasers on the #DEFCON 18 badge.
            Originally posted by JoeGrand
            (3:22 PM Feb 26th) RT @14311: laying down inks on the #defcon 18 badge art! coming out pretty nice! <- OMG, that is an understatement. The artwork looks SICK!
            Originally posted by JoeGrand
            (7:47 PM Mar 3rd) You mean the #DEFCON 18 badge *components* have been ordered. They are far from done. Still need to finish PCB design, write firmware, etc.
            Originally posted by MisterGlass
            (8:02 PM Mar 3rd) @joegrand Please tell me you found someone else to code the firmware this time.
            Originally posted by JoeGrand
            (8:46 PM Mar 3rd) RT @MisterGlass: Please tell me you found someone else to code the firmware this time. <- Nope. What's the problem?
            Originally posted by JoeGrand
            (3:07 PM Mar 4th) Packing boxes full of #DEFCON 18 badge components to ship to e-Teknet. Over 300k individual pieces.
            Originally posted by JoeGrand
            (5:44 PM Mar 4th) Importing final graphics and cutouts onto #DEFCON 18 badge PCB. @14311 is an art master.
            Originally posted by brennantom
            (3:18 PM Mar 4th) @joegrand so defcon will acutally have badges this year on time yippie :)
            Originally posted by JoeGrand
            (6:50 PM Mar 4th) @brennantom If it were only that easy! Still lots to do and lots of things that need to go right. But, that's the fun of it :P
            Originally posted by JoeGrand
            (10:04 AM Mar 8th) Ordering pre-production prototypes of the #DEFCON 18 Badge. HW is locked in and low-level drivers done. Now to work on firmware.
            Originally posted by asiverly
            (10:06 AM Mar 8th) @joegrand please order a ton more / I don't want a blank board again.
            Originally posted by JoeGrand
            (10:38 AM Mar 8th) @asiverly That is up to @thedarktangent and is a harder choice than many think. Numbers have already been decided and components ordered.
            Originally posted by JoeGrand
            ( 8:07 PM Mar 24th) DC18 Badge Call-for-Integration: Doing something for #DEFCON 18 and want the badge to do something for you? http://tinyurl.com/yfqtjdk
            Originally posted by Engineer_in_MKT
            (9:42 PM Mar 24th) @joegrand do you want to giveaway a couple of DSC 56F8006 boards to the #DEFCON crowd ?
            Originally posted by JoeGrand
            (11:25 AM Mar 25th) @Engineer_in_MKT Absolutely! Those would be great awards for the #DEFCON Badge Hacking Contest :)
            Originally posted by JoeGrand
            (11:27 AM Mar 25th) All #DEFCON 18 Badge components have been received, processed, and shipped to e-Teknet. Still working on firmware...
            Originally posted by JoeGrand
            (9:07 PM Mar 30th) RT @_defcon_: Only 2 days left for #DEFCON 18 badge call for integration. Details at: https://forum.defcon.org/showthread.php?p=112333
            (Added datestamps to the samples quoted in the top post:)

            Originally posted by joeGrand
            (8:22 PM Apr 30th) The #DEFCON 18 Badge prototypes have arrived! http://imgur.com/NzTOI.jpg
            Originally posted by joeGrand
            (12:27 AM May 1st) After 6 hours of debugging hell thanks to poor quality PCB assembly, the #DEFCON 18 Badge final hardware has been approved!
            Originally posted by joeGrand
            (12:29 AM May 1st) We'll start production PCB fab on Monday! Still need to wrap up firmware design and I have about a month to do so. #DEFCON
            Originally posted by snowchyld
            (1:14 AM May 1st) @joegrand what ever happened to 'ready by dec 2009' ;)
            Originally posted by JoeGrand
            (1:01 PM May 1st) @snowchyld That wasn't my idea :P
            Originally posted by snowchyld
            (1:39 PM May 1st) @joegrand lies, i do recall you agreeing to that in front of a few hundrad defcon participants ;)
            Originally posted by joeGrand
            (4:08 PM May 4th) #DEFCON 18 Badge firmware update: Low-level routines and basic state machine done, some hidden features added. So far, so good.
            Originally posted by ThisIsHNN
            (8:06 PM May 5th) Just got word from @joegrand that the HNN secret code has been embedded into the @defcon badge, good luck decyphering it! Mwahahaha
            Originally posted by joegrand
            (10:39 PM May 5th) @ThisIsHNN Uhrrr, so much for keeping that a secret!
            Originally posted by joeGrand
            (7:31 AM May 7th) Ordering additional components for the #DEFCON 18 badge. DT made a last minute decision to make 1000+ more!
            Originally posted by joeGrand
            (11:18 AM May 7th) Just bought the last known quantity of Freescale MC56F8006VLC available in the US. Now I have microcontrollers for the extra #DEFCON badges.
            Originally posted by daftdoki
            (12:28 PM May 7th) @joegrand >|< 10k this year?
            Originally posted by joeGrand
            (2:34 PM May 7th) @daftdoki 7,780 if all goes well.
            Originally posted by joeGrand
            (2:25 PM May 7th) Shocked @ production pricing for #DEFCON 18 badge fab & assembly. 4x higher than initial estimate. e-Teknet fail. Looking at other options.
            Originally posted by zrevai
            (2:32 PM May 7th) @joegrand So e-Teknet can't produce the PCB's at a reasonable price per unit??? What fell apart on thier end? They have been great in past.
            Originally posted by joeGrand
            (3:04 PM May 7th) @zrevai We're doing some complicated fabrication, but the latest pricing has caught us off guard and way out of our budget. #DEFCON 18
            Originally posted by zrevai
            (3:35 PM May 7th) @joegrand #DEFCON 18, Bummer :( So hopefully you can find a way to get them assembled A.S.A.P. Sounds like an amazing badge.
            Originally posted by joeGrand
            (4:07 PM May 7th) No matter how carefully you plan or how early you start, something will always go wrong. Let the drama begin! #DEFCON 18 Badge
            Originally posted by framerate
            (4:52 PM May 7th) @joegrand awww what happened man?
            Added after edit:
            Originally posted by JoeGrand
            (~3:00am May 12) #DEFCON 18 Badge firmware update: Main functionality complete! Implementing final secret mode.
            Originally posted by astcell
            (~12:00pm May12) @joegrand is it still secret if it's twittered?
            Originally posted by joeGrand
            (~1:00pm May12) @astcell Yes, because you still don't know what it is :P #DEFCON
            After Edit:
            Originally posted by joeGrand
            (~4:00pm May 18) #DEFCON 18 Badge disaster averted! Figured out a solution w/ e-Teknet for our complicated process. PCB fabrication is now underway!
            Originally posted by joeGrand
            (~4:00pm May 18) We investigated many other on- and off-shore options, but all were too risky logistically. Thanks for all recommendations. #DEFCON 18 Badge
            Last edited by TheCotMan; May 18, 2010, 18:07.

            Comment

            • #7
              Re: Defcon 18 badge-related tweets and rumors

              Originally posted by flea View Post
              When did it actually 'begin'? I was under the impression that the goal was to have badges done by xmas. I'm under further impression that the process didn't begin until a month or so ago...
              Ah but it wasn't specified WHICH Christmas.

              Comment

              • #8
                Re: Defcon 18 badge-related tweets and rumors

                Less than 8K badges. So a couple K will probably get stuck with a paper badge again this year, eh? Get their early on THUR, y'all! :-)

                Comment

                Previous template Next
                Working...
                X