any ideas from folks on what tasks will need.to be completed to unlock the defcon badge
Announcement
Collapse
No announcement yet.
Any ideas on tasks which will help unlock.the defcon 27 badge.
Collapse
X
-
Originally posted by abovebelow View Post27 badge.. I had the following ideas on this. 1 hit up and sync with goons vendors and other attendees. 2. hit the villages and meet up and synch with those runnin rhe villages
Comment
-
+++N00b Disclaimer+++
Me and my mate think we're onto something. The Defcon symbols (floppy, rottary dial, keyhole, jolly Rodger) are on the back of the badge. In a nautical, North is jolly, West is rottary, south is key, east is floppy. Perhaps badge pairing at each of these villages is a clue.
We also noted the unique symbols each lanyard has and the theory of pairing with those like lanyard carriers.
We ran into the blues, the pinks, and the one black badge carrier.
Also, we are looking into connecting to the device via UART to reach the console interface.
Any other info or tips are well received. Also, if your LFG, we're 2 and down to clan up.
????
Comment
-
This is community driven. Use the stickers that came with your badge to help others identify what your badge is from a distance. Sync with all different badge types. Good luck
Z3ro@rmy please let me know if you read/write to the badge.
Comment
-
update: jacked in via serial, found that my pulsing code might be a diag had sequence in relation to my radio being damaged. once consoled in, we found my badge would register flags, but not retain them. So radio may or may not be a culprit, as send receive was logged but not stored. Friendly goon recommended radio repair at hardware hack village. not opposed. but tbh, many badges day 3 are exhibiting these same symptoms. perhaps the circuitry was damaged by unprotected lanyard action, or this is all game. when I scanned, I logged as human no points. no flags will stick. not rick'd at all. :(
-
one of my battery mounts was cold-soldered and snapped off. So I found the nearest super-glue retailer and did a quick repair. I also found that if I jumpered pin 1 of J1 to either of pins 2,6,8, or 10 I could effectively clear two days worth of Con activity. Now to regain that activity, plus some with the source code from the
-
-
If you have a magic token (keep switching classes), to reset to human try syncing with a human or remove the battery and replace. I removed my wife's battery last night and she is back to human 100% today (no, she is not a robot). I took mine out for the night too because when at 100% the lights constantly blink so not sure what this means for sleep mode and battery drain.
Last edited by Haxmaul; August 10, 2019, 14:52.
Comment
Comment