Announcement

Collapse
No announcement yet.

Call For DJs bands and ideas

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    Re: Call For DJs bands and ideas

    Originally posted by DJ Jackalope View Post
    As far as I know, pool parties Defcon style are 100% out at the Riv.

    I'm staying at the Riv, showing up on Tuesday.
    Cool 'lope!

    yeah, I was afraid of that. last year some twit threw just one plastic cup off a balcony that landed 30 feet from a security guard patrolling that pool and 50 seconds later the penthouse renegade raging room party was shut down and dismantled for good.

    We need a playground, not a frigging ward!

    OK, I'm pretty sure if we need a 3rd PA, a couple 'a decks and a mixer, we could pool together and rent a set.... skippy's got the RAM 1500 again this year. :)
    But now, ironically, if the PA's aren't the challenge, sounds like it might be a LOCATION to accomadate all of us technoids!

    Comment


    • #77
      Re: Call For DJs bands and ideas

      I've secured an ER-1 for the funness. I'll get those samples chopped up into glitchy goodness this weekend. I've also got a small handful of guitar effects pedals for general audio destruction. Unfortunately I won't be bringing the A or the MPC but with Renoise and the ER-1 I figure we should be able to shit out some audio gold.

      Comment


      • #78
        Re: Call For DJs bands and ideas

        If someone can bring a guitar, my friend will be able to rock out on it.

        Comment


        • #79
          Re: Call For DJs bands and ideas

          Ok so I'll be bringing the ER-1, a midi controller, and a few effects devices.

          In a sort of drunken preparation for getting my techno on, this is what I built tonight:

          (pics linked due to size)
          http://pohl.ececs.uc.edu/~k/tandy-techno1.jpg
          http://pohl.ececs.uc.edu/~k/tandy-techno2.jpg

          Comment


          • #80
            Re: Call For DJs bands and ideas

            Originally posted by bloofar View Post
            Ok so I'll be bringing the ER-1, a midi controller, and a few effects devices.

            In a sort of drunken preparation for getting my techno on, this is what I built tonight:

            (pics linked due to size)
            http://pohl.ececs.uc.edu/~k/tandy-techno1.jpg
            http://pohl.ececs.uc.edu/~k/tandy-techno2.jpg
            Wow...wtf is that thing? Can you send me some .mp3 of that Radio Shack action?
            How come I haven't seen one of these???

            The ER-1 should be great.... and if you are chopping up samples, what are you bringing for a sampler!?

            Comment


            • #81
              Re: Call For DJs bands and ideas

              Originally posted by shagghie View Post
              Wow...wtf is that thing? Can you send me some .mp3 of that Radio Shack action?
              How come I haven't seen one of these???
              It's the newest incarnation of the RadioShack 300-in-1 project lab thingies. I had 2 of those when I was a kid (probably in the parents basement somewhere). The newest one still has springs for shit like poteniometers, speaker, transformer, leds, etc. but instead of having all the components embedded in the middle, it has breadboards and loose components. The annoying thing is that all of the discrete components aren't labeled with the values, so you either sit there with look up tables or an LCR meter for identifying components. (.1 uF caps were labeled '104' and such)

              Built on it was a voltage controlled oscillator. Pitch was controlled by the buttons on the bottom with which let you play the notes from a fifth chord. Root of the chord varied based on the position of one of the potentiometers. The other pot controlled the amplitude. The VCO was based on a FM Mims design using a 555 timer IC. It was plugged into the er-1 which was used for gating and delay as well as a acidy drum line. When you touched the cap on the output circuit the tone got really nice and nasty.

              A few drinks later I tried to add an additional 555 and set up a feedback loop. Unfortunately either I was too drunk to draw out the schematic properly or I was too drunk to connect the wires correctly. There was a high-pitched (migrane-inducing) tone I could control with the voltage input but not to the point where it was low enough to be useful.

              Unfortunately there's no mp3s. My buddy didn't have the appropriate cables handy and I didn't have my laptop there.

              Originally posted by shagghie View Post
              The ER-1 should be great.... and if you are chopping up samples, what are you bringing for a sampler!?
              Samples will be trigged through Reason running on my laptop. Renoise and Reason are the only reason I ever boot into Windows anymore.


              At this point the gear list is:
              o Laptop running renoise
              o Yamaha UX-256 midi interface
              o Korg ER-1
              o Akai MPC24 midi controller
              o Alesis Nanoverb
              o Shitty minimixer
              o Flask of whisky
              o Ungodly amounts of red bull


              How many people are in at this point? Has a jamming location been confirmed? I can set up the gear in about 3x3' of table space.

              Oh and if anybody wants to pay for frieght I can bring my Allen & Heath SR-424 :)
              Last edited by bloofar; July 29, 2007, 23:45.

              Comment


              • #82
                Re: Call For DJs bands and ideas

                Also Shagghie

                I like the placement of the upside-down Furman in your rack :)

                Comment


                • #83
                  Re: Call For DJs bands and ideas

                  Originally posted by bloofar View Post
                  Also Shagghie

                  I like the placement of the upside-down Furman in your rack :)

                  That's what she said.


                  Ok, so like, no idea about a location. I'd personally like to have a sky boxen...
                  But whom do we contact to find out what parties (read: people/clubs/haxor groups) have what boxen and whether they'd enjoy some livesound PA acid jamming mood music. *cough* Bueller?

                  Comment


                  • #84
                    Re: Call For DJs bands and ideas

                    Originally posted by MitchMitchem View Post
                    If someone can bring a guitar, my friend will be able to rock out on it.
                    I will have one, and will be able to rock out on it ;-)

                    Comment


                    • #85
                      Re: Call For DJs bands and ideas

                      Sorry guys, had to cancel due to illness :-(

                      Hope everything went smoothly -

                      Comment

                      Working...
                      X