Badge Mods

[yamamushi TigerBlood Find all posts View Profile Close yamamushi]

Does anyone have a link to a distributor for the chips you can add onto the badges?

Thanks.

[[Syntax] DC210 POC / GeoChallenge Find all posts View Profile Close [Syntax]]

Re: Badge Mods

I told you on the phone to visit their website and order the parts, because they had free samples. So I'll post the address for the sake of other people and the fact that someone else will answer your post eventually.

http://www.freescale.com

Were you not giving a sh*t, not paying attention, or just drunk when I told you?

[yamamushi TigerBlood Find all posts View Profile Close yamamushi]

Re: Badge Mods

Probably drunk. Yeah, I'll go with that answer.

[Kingpin The Sultan of Solder Find all posts View Profile Close Kingpin]

Re: Badge Mods

Here's a bit of the text from the DEFCON 15 program regarding development tools and parts. You should be able to get a few free samples of each part from Freescale (http://www.freescale.com). The source code, schematics, etc. for the badge are on the DC15 CD and will be up on my site in a bit, too...

Optional circuitry (fully designed, but unpopulated on the final badge circuit board) supports a Freescale MMA7260QT Triple-Axis Accelerometer for motion-control applications and MC13191FC 2.4GHz RF Transceiver for 802.15.4 or ZigBee applications.

and

The software development environment, Codewarrior Development Studio for HC(S)08 Microcontrollers, is available for free (up to 16KB) from: http://www.freescale.com/codewarrior

Hardware debugging can be done with the SPYDER08 module (http://www.freescale.com/webapp/sps/...de=USBSPYDER08) or P&E Micro HCS08 MultiLink USB-ML-12 (http://www.pemicro.com/products/prod...?product_id=33)